Multi-information display (12.3-inch display)

The multi-information display is used to display fuel efficiency related information and various types of driving-related information. The multi-information display can also be used to change the display settings and other settings.

Display contents

Following information is displayed in each area on the multi-information display.

Content display area (left)

Content display area (center)

Content display area (right)

Driving support system information display area

When driving information support system is displayed on the content display area, the system operating state will not be displayed in this area.

RSA (Road Sign Assist) display area (if equipped) (RSA (Road Sign Assist)*)

Multi-information display Content display Content display area (center)

Blank

Driving support system information display (Driving support system information display)

Map display (Map display)

Trailer settings screen (Trailer settings screen)

Settings display (Settings display)

Warning message display

Content display area (left/right)

Blank

Fuel Economy (Fuel Economy)

Eco Driving Indicator (Eco Driving Indicator)

Driving support system information display (Driving support system information display)

Navigation system-linked display (Navigation system-linked display)

Audio system-linked display (Audio system-linked display)

Drive information display (Driving information display)

Tire inflation pressure (Tire inflation pressure)

Traction monitor display (if equipped) (Traction monitor display (4WD models))

Trailer brake (Trailer brake (if equipped))

Trailer mode BSM (Trailer mode BSM (if equipped))

Clinometer (Clinometer)

Voltmeter and Engine oil pressure gauge (Voltmeter and Engine oil pressure gauge)

Engine oil temperature gauge and Transmission oil temperature gauge (Engine oil temperature gauge and Transmission oil temperature gauge)

Boost gauge (Boost gauge)

Note:

Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

Warning:

Caution for use while driving

When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle.

Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc., ahead of the vehicle.

The information display at low temperatures

Switches Meter control switches

Multi-information display Meter control switches

Meter Meter control switches

Steering wheel Meter control switches Changing the meter display

The multi-information display is operated using the meter control switches.

/ : Change displayed content and scroll up/down the screen / : Change the screen and move the cursor

Press: Enter/SetPress and hold: Reset/Display customizable items/Display the cursor

Return to the previous screen

Call sending/receiving and history display

Linked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to the “ MULTIMEDIA OWNER’S MANUAL”.

Changing the display

The multi-information display is operated using the meter control switches.

Changing the meter display type setting

The meter display type setting can be changed on “ Settings”. (Settings display)

Changing the screen

Select items from the combination of 3 screens to display on each 3 content display areas.

Press or of the meter control switches to scroll the screen.

Changing the display contents

Switches items displayed on each contents display area (left/center/right).

Press and hold to display the cursor on the content display area (center).

Press or to move the cursor and select the content display area.

Press or to select the display items.

Items displayed in the content display area

Select items to enable/disable on the content display area (left/right).

Press and hold to display area (center).

Press or to move the cursor and select the content display area.

Contents display area (left): Press to display contents list.Contents display area (right): Press to display contents list.

Press or to select the display items.

Press to enable/disable items.

Warning:

Caution for use while driving

For safety, avoid operating the meter control switches while driving as much as possible, and do not look continuously at the multi-information display while driving. Stop the vehicle and operate the meter control switches. Failure to do so may cause a steering wheel operation error, resulting in an unexpected accident.

Multi-information display Fuel economy

Fuel economy

Current fuel consumption

Average fuel economy

Fuel consumption Current fuel consumption

Fuel consumption Average fuel economy Fuel Economy

Current fuel economy

Displays the instantaneous current fuel consumption.

Average fuel economy

Displays the average fuel economy since the function was reset or the average fuel economy after starting or refueling.^{*1, 2, 3}

The average fuel economy selected by Fuel Economy on the “ Settings” screen is displayed.

^*1

Use the displayed fuel consumption as a reference only.

^*2

Average fuel economy after starting is reset each time the engine stops.

^*3

Average fuel economy since function was reset can be reset by pressing and holding .

Multi-information display Eco Driving Indicator

Eco Driving IndicatorEco Driving Indicator

Eco Driving Indicator Zone Display

Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration.

Eco driving ratio based on acceleration

If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illuminate.

Zone of Eco driving

Multi-information display Driving support system information display

Driving support system information displayDriving support system information display

Select to display the operational status of the following systems:

LDA (Lane Departure Alert) (LDA (Lane Departure Alert))

LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist))

Dynamic radar cruise control (Dynamic radar cruise control)

Cruise control (Cruise control)

PDA (Proactive driving assist) (if equipped) (PDA (Proactive driving assist)*)

PCS (Pre-Collision System) (PCS (Pre-Collision System))

Map display

Multi-information display Map display Map display

Displays the map data according to the navigation system.

Switches the displayed map size by pressing .

Multi-information display Navigation system-linked display

Navigation system-linked displayNavigation system-linked display

Select to display the following navigation system-linked information:

Route guidance to destination

Compass display (heading-up display)

Multi-information display Audio system-linked display

Audio system-linked displayAudio system-linked display

The operating conditions of the audio system can be displayed on the multi-information display.

Drive informationDriving information display

Drive information

2 items that are selected using the “ Drive Info Items” setting (average speed, distance and total time) can be displayed vertically.

Use the displayed information as a reference only.

Following items will be displayed.

“ Average Speed”: Displays the average vehicle speed since engine start^*

“ Distance”: Displays the distance driven since engine start^*

“ Total Time”: Displays the elapsed time since engine start^*

These items are reset each time the engine stops.

Trip information

2 items that are selected using the “ TRIP A Items” or “ TRIP B Items” setting (average speed, distance and total time) can be displayed vertically.

Use the displayed information as a reference only.

“ Average Speed”: Displays the average vehicle speed since the display was reset^*

“ Distance”: Displays the distance driven since the display was reset^*

“ Total Time”: Displays the elapsed time since the display was reset^*

To reset, display the desired item and press and hold .

Tire inflation pressureTire inflation pressure

Displays inflation pressure of each tire.

Traction monitor displayTraction monitor display (4WD models)

Front tire direction display

Displays the operation amount and direction of the steering wheel via changes to the front tires on the display.

Wheel spin display

When a tire is spinning, its icon on the display changes its color and blinks.

This item is displayed only when driving mode is set to sport mode.

The illustration used is intended as an example, and may differ from the image that is actually displayed on the multi-information display.

Trailer Settings screenTrailer settings screen

Trailer settings screen

Displays the name of the currently selected trailer or “ No Trailer Selected” if a trailer has not yet been selected

Add a new trailer or select an existing saved trailer

Maximum of 10 trailers can be saved.

Select the trailer name, length, hitch type, brake type and number of axles.

The parameters which can be set depend on which of the trailer systems are installed on the vehicle. (Trailer Brake Controller, Trailer Backup Guide and Trailer Mode BSM)

Deselect the currently selected trailer

Used when a 4-pin trailer connector has been disconnected. (4-pin trailer connector disconnection cannot be automatically detected by Trailer Brake Controller)

Edit the parameters of a saved trailer (name, length, hitch type, brake type and number of axles)

The parameters which can be edited depend on which of the trailer systems are installed on the vehicle (Trailer Brake Controller, Trailer Backup Guide and Trailer Mode BSM)

Delete a saved trailer

Trailer detail screen

Displays the name of the current trailer which is being added or edited.

Change the name of the trailer.

Change the hitch type of the trailer between ball hitch (conventional), gooseneck or fifth wheel. Note that gooseneck and fifth wheel trailers are not supported for some features (Trailer Backup Guide and Trailer Mode BSM)

Change the length of the trailer. If the exact length is not listed, round up the actual length of the trailer to the closest available value.

“ Auto” length detection can also be selected.

Change the number of axles.

Change the brake type (electric or electric over hydraulic) and weight of the trailer, or turn trailer brakes off for that trailer.

Save the trailer information

If there are any errors with the trailer values, re-select the value or delete and re-save the trailer. If the error continues, contact your Toyota dealer.

Trailer brakeTrailer brake (if equipped)

Displays trailer brake control status (Trailer brake controller*) and trailer type^*.

To select the trailer, press and hold the meter control switch. (Changing the meter display)

Trailer Mode BSMTrailer mode BSM (if equipped)

Displays trailer length^* and trailer blind spot status (BSM (Blind Spot Monitor)).

To select the trailer, press and hold the meter control switch. (Changing the meter display)

ClinometerClinometer

Clinometer displays the vehicle inclination to the front, rear, left and right within a range of 0° to approximately 30°.

Degree markers of incline to the front and rear

Indicates the vehicle inclination in degrees in the front and rear directions.

Degree markers of incline to the left and right

Indicates the vehicle inclination in degrees in the left and right directions.

Pointer

Indicates the degree of the vehicle inclination in comparison to a parallel line.

Voltmeter

Engine oil pressure gaugeVoltmeter and Engine oil pressure gauge

Voltmeter

Displays the charge state

Engine oil pressure gauge

Displays the engine oil pressure

Notice:

Voltmeter

When the voltmeter indicates 19 V or higher or 9 V or lower while the engine is running, there may be a battery or charging system malfunction. Have the vehicle inspected at your Toyota dealer.

Engine oil pressure gauge

When the value of the engine oil pressure gauge drops while the engine is running, stop the vehicle in a safe place immediately and check the amount of engine oil. (Checking the engine oil)

When the oil pressure drops even though the engine oil amount has not decreased, or if the oil pressure does not increase when engine oil is added, contact your Toyota dealer, as there may be a problem with the lubrication system.

Engine oil temperature gauge

Transmission oil temperature gaugeEngine oil temperature gauge and Transmission oil temperature gauge

Engine oil temperature gauge

Displays the engine oil temperature

Transmission oil temperature gauge (if equipped)

Displays the transmission oil fluid temperature

Boost gaugeBoost gauge

Displays the boost pressure.

Multi-information display Settings

Meter Settings

Language (multi-information display)Settings display

Meter display settings that can be changed

Language

Select to change the language displayed.

Units

Select to change the units of measure displayed.

Meter Type

Select to change the meter type setting.

Meter Style

Select to change the meter style.

Dial Type

Select to change dial type.

Fuel economy display

Select to change the average fuel consumption display between after start/after reset/after refuel. (Fuel Economy)

Drive information and Trip A/B items

Select to set the first and second items of the drive information display to any of the following: average vehicle speed/distance/elapsed time.

Pop-up display

Select to enable/disable pop-up displays for each relevant system.

Default setting

Select to reset the meter display settings to the default setting.

Vehicle functions and settings that can be changed

Customizable features

Note:

Suspension of the settings display

Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place.

If a warning message is displayed, operation of the settings display will be suspended.

Warning:

Cautions during setting up the display

If the engine is operating while changing certain settings on the settings display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

Notice:

During setting up the display

To prevent battery discharge, ensure that the engine is operating while setting up the display features.

Multi-information display Stop & Start system information

Stop & Start system information display

Stop & Start system System information display Stop & Start system information (if equipped)

Stop & Start system operation time (after start)/status notification

Displays the current amount of time the engine has been stopped by the operation of the Stop & Start system.

Also shows the status of the Stop & Start system with a pop-up display. (Multi-information display messages)

Stop & Start system settings

The length of time of the Stop & Start system will operate when the “ A/C” switch of the air conditioning system is on can be set to 2 different levels in “ Settings” of the multi-information display. (Changing the idling stop time with the air conditioning system on)

Suggestion function

Multi-information display Suggestion function Suggestion function

Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches.

Suggestion to turn on the headlights

If the headlight switch is in other than or , and the vehicle speed is 3 mph (5 km/h) or higher for a certain amount of time when the surroundings are dark, a suggestion message will be displayed.

Suggestion to turn off the headlights

If the headlights are left on for a certain amount of time after the engine switch has been turned off, a suggestion message will be displayed.

When the headlight switch is in the AUTO position: The message asking if you wish to turn the headlights off is displayed. To turn the headlights off, select “ Yes”.

If the driver’s door is opened after the engine switch is turned off, this suggestion message will not be displayed.

Note:

Customization

The suggestion function can be turned on/off. (Gauges, meters and multi-information display (with 12.3-inch display) (, ))