Cleaning and protecting the vehicle interior Perform cleaning in a manner appropriate to each component and its material. Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water. If dirt cannot be removed, wipe it off with a soft cloth dampened with neutral detergent diluted to approximately 1%.Wring out any excess water from the cloth and thoroughly wipe off remaining traces of detergent and water. Note: Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not use water. Wipe dirty surfaces and let them dry. Excellent results are obtained by keeping the carpet as dry as possible. Seat belts Cleaning and maintaining the seat belt Cleaning Seat belts Care Seat belts Handling the seat belts Clean with mild soap and lukewarm water using a cloth or sponge. Also check the belts periodically for excessive wear, fraying or cuts. Warning: Water in the vehicle Do not get any of the SRS components or wiring in the vehicle interior wet. (SRS airbags)An electrical malfunction may cause the airbags to deploy or not function properly, resulting in death or serious injury. Vehicles with wireless charger:Do not let the wireless charger (Wireless charger (if equipped)) get wet.Failure to do so may cause the charger to become hot and cause burns or could cause electric shock resulting in death or serious injury. Cleaning the interior (especially instrument panel) Do not use a polish wax or polish cleaner. The instrument panel may reflect off the windshield, obstructing the driver’s view and leading to an accident, resulting in death or serious injury. Notice: Cleaning detergents Do not use the following types of detergent, as they may discolor the vehicle interior or cause streaks or damage to painted surfaces: Areas other than the seats and steering wheel: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach Seats: Alkaline or acidic solutions, such as thinner, benzene, and alcohol Steering wheel: Organic substances, such as thinner, and cleaner that contains alcohol Do not use a polish wax or polish cleaner. The instrument panel’s or other interior part’s painted surface may be damaged. Preventing damage to leather surfaces Observe the following precautions to avoid damage to and deterioration of leather surfaces: Remove any dust or dirt from leather surfaces immediately. Do not expose the vehicle to direct sunlight for extended periods of time. Park the vehicle in the shade, especially during summer. Do not place items made of vinyl, plastic, or containing wax on the upholstery, as they may stick to the leather surface if the vehicle interior heats up significantly. Water on the floor Do not wash the vehicle floor with water.Vehicle systems such as the audio system may be damaged if water comes into contact with electrical components such as the audio system above or under the floor of the vehicle. Water may also cause the body to rust. When cleaning the inside of the windshield Do not allow glass cleaner to contact the lens. Also, do not touch the lens. (Sensors used by Toyota Safety Sense 3.0) Cleaning the inside of the back window Do not use a glass cleaner to clean the back window, as this may cause damage to the back window defogger heater wires or antenna. Use a cloth dampened with lukewarm water to gently wipe the window clean. Wipe the window in strokes running parallel to the heater wires or antenna. Be careful not to scratch or damage the heater wires or antenna. Cleaning the areas with satin-finish metal accents Remove dirt using a water-dampened soft cloth or synthetic chamois. Wipe the surface with a dry, soft cloth to remove any remaining moisture. Note: Cleaning the areas with satin-finish metal accents The metal areas use a layer of real metal for the surface. It is necessary to clean them regularly. If dirty areas are left uncleaned for long periods of time, they may be difficult to clean. Cleaning the leather areas Remove dirt and dust using a vacuum cleaner. Wipe off any excess dirt and dust with a soft cloth dampened with diluted detergent. Use a diluted water solution of approximately 5% neutral wool detergent. Wring out any excess water from the cloth and thoroughly wipe off all remaining traces of detergent. Wipe the surface with a dry, soft cloth to remove any remaining moisture. Allow the leather to dry in a shaded and ventilated area. Note: Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. Cleaning the synthetic leather areas Remove dirt and dust using a vacuum cleaner. Wipe it off with a soft cloth dampened with neutral detergent diluted to approximately 1%. Wring out any excess water from the cloth and thoroughly wipe off remaining traces of detergent and water.