Multi-information display (7-inch display) The multi-information display is used to display fuel efficiency related information and various types of driving-related information. The multi-information display can also be used to change the display settings and other settings. Display contents Display RSA (Road Sign Assist) (if equipped) Displays recognized signs while the RSA (Road Sign Assist) is operating. (RSA (Road Sign Assist)*) Content display area By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings. Warning or advice pop-up displays are also displayed in certain situations. Multi-information display Menu icons Menu iconsMenu icons Information related to each icon can be displayed by selecting the icon with the meter control switches. Some of the information may be displayed automatically depending on the situation.
Driving information display (Content of driving information)
Driving support system information display (Driving support system information display)
Audio system-linked display (Audio system-linked display)
Vehicle information display (Vehicle information display)
Settings display (Settings display)
Warning message display (If a warning message is displayed)
Note: Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display. Warning: Caution for use while driving When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc., ahead of the vehicle. The information display at low temperatures The information display at low temperatures Switches Meter control switches Multi-information display Meter control switches Meter Meter control switches Steering wheel Meter control switches Changing the meter display The multi-information display is operated using the meter control switches. / : Select menu icons / : Change displayed content, scroll up/down the screen and move the cursor up/down Press: Enter/SetPress and hold: Reset/Display customizable items Return to the previous screen Call sending/receiving and history display Linked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to the “ MULTIMEDIA OWNER’S MANUAL”. Multi-information display Driving information display Driving information displayContent of driving information Display items Fuel economy Eco Driving Indicator/Distance to empty Multi-information display Fuel economy Fuel economy Current fuel consumption Average fuel economy Fuel consumption Current fuel consumption Fuel consumption Average fuel economy Fuel economy Use the displayed values as a reference only. Current fuel consumption Displays instantaneous current fuel consumption. Average fuel economy (after reset) To reset the average fuel economy display, press and hold the meter control switch. The average fuel economy display can be changed in . (Settings display) Average fuel economy (after start) Displays the average fuel consumption since engine start. Average fuel economy (after refuel) Displays the average fuel consumption since the vehicle was refueled. Multi-information display Eco Driving Indicator Eco Driving IndicatorEco Driving Indicator/Distance to empty Eco Driving Indicator Eco Driving Indicator Zone Display Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration. Eco driving ratio based on acceleration If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illuminate. Zone of Eco driving Distance to empty Displays the driving range with remaining fuel. (Distance to empty) Note: Distance to empty This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. When only a small amount of fuel is added to the tank, the display may not be updated. When refueling, turn the engine switch to OFF. If the vehicle is refueled without turning the engine switch to OFF, the display may not be updated. When “ Refuel” is displayed, the remaining fuel amount is low and the distance that can be driven with the remaining fuel cannot be calculated. Refuel immediately. Multi-information display Driving support system information display Driving support system information display Multi-information display Navigation system-linked display Navigation system-linked displayDriving support system information display Driving support system information Select to display the operational status of the following systems: LDA (Lane Departure Alert) (LDA (Lane Departure Alert)) LTA (Lane Tracing Assist) (LTA (Lane Tracing Assist)) Dynamic radar cruise control (Dynamic radar cruise control) Cruise control (Cruise control) PCS (Pre-Collision System) (PCS (Pre-Collision System)) PDA (Proactive driving assist) (if equipped) (PDA (Proactive driving assist)*) Navigation system-linked display Select to display the following navigation system-linked information: Route guidance to destination Compass display (heading-up display) Multi-information display Audio system-linked display Audio system-linked displayAudio system-linked display The operating conditions of the audio system can be displayed on the multi-information display. Multi-information display Vehicle information display Drive information Vehicle information display Clinometer Trailer brake Trailer Mode BSM Traction monitor display Voltmeter Engine oil pressure gauge Boost gauge Engine oil temperature gauge Transmission oil temperature gauge Tire inflation pressureVehicle information display Trailer brake (if equipped) Displays trailer brake control status (Trailer brake controller*) and trailer type*. *To select the trailer, press and hold the meter control switch. (Changing the meter display) Trailer Mode BSM (if equipped) Displays trailer length* and trailer blind spot status (BSM (Blind Spot Monitor)*). *To select the trailer, press and hold the meter control switch. (Changing the meter display) Drive information 2 items that are selected using the “ Drive Info Items” setting (average speed, distance and total time) can be displayed vertically. Use the displayed information as a reference only. Following items will be displayed. “ Average Speed”: Displays the average vehicle speed since engine start* “ Distance”: Displays the distance driven since engine start* “ Total Time”: Displays the elapsed time since engine start* *These items are reset each time the engine stops. Trip information 2 items that are selected using the “ TRIP A Items” or “ TRIP B Items” setting (average speed, distance and total time) can be displayed vertically. Use the displayed information as a reference only. “ Average Speed”: Displays the average vehicle speed since the display was reset* “ Distance”: Displays the distance driven since the display was reset* “ Total Time”: Displays the elapsed time since the display was reset* *To reset, display the desired item and press and hold the meter control switch. Tire inflation pressure Displays inflation pressure of each tire. Traction monitor display (4WD models) Front tire direction display Displays the operation amount and direction of the steering wheel via changes to the front tires on the display. Wheel spin display When a tire is spinning, its icon on the display changes its color and blinks. This item is displayed only when driving mode is set to sport mode. The illustration used is intended as an example, and may differ from the image that is actually displayed on the multi-information display. Clinometer Clinometer displays the vehicle inclination to the front, rear, left and right within a range of 0° to approximately 30°. Degree markers of incline to the front and rear Indicates the vehicle inclination in degrees in the front and rear directions. Degree markers of incline to the left and right Indicates the vehicle inclination in degrees in the left and right directions. Pointer Indicates the degree of the vehicle inclination in comparison to a parallel line. Voltmeter and Engine oil pressure gauge Voltmeter Displays the charge state Engine oil pressure gauge Displays the engine oil pressure Engine oil temperature gauge and Transmission oil temperature gauge Engine oil temperature gauge Displays the engine oil temperature Transmission oil temperature gauge (if equipped) Displays the transmission oil fluid temperature Boost gauge Displays the boost pressure. Notice: Voltmeter When the voltmeter indicates 19 V or higher or 9 V or lower while the engine is running, there may be a battery or charging system malfunction. Have the vehicle inspected at your Toyota dealer. Engine oil pressure gauge When the value of the engine oil pressure gauge drops while the engine is running, stop the vehicle in a safe place immediately and check the amount of engine oil. (Checking the engine oil) When the oil pressure drops even though the engine oil amount has not decreased, or if the oil pressure does not increase when engine oil is added, contact your Toyota dealer, as there may be a problem with the lubrication system. Trailer Settings screenTrailer settings screen Trailer settings screen Displays the name of the currently selected trailer or “ No Trailer Selected” if a trailer has not yet been selected Add a new trailer or select an existing saved trailer Maximum of 10 trailers can be saved. Select the trailer name, length, hitch type, brake type and number of axles. The parameters which can be set depend on which of the trailer systems are installed on the vehicle. (Trailer Brake Controller, Trailer Backup Guide and Trailer Mode BSM) Deselect the currently selected trailer Used when a 4-pin trailer connector has been disconnected. (4-pin trailer connector disconnection cannot be automatically detected by Trailer Brake Controller) Edit the parameters of a saved trailer (name, length, hitch type, brake type and number of axles) The parameters which can be edited depend on which of the trailer systems are installed on the vehicle (Trailer Brake Controller, Trailer Backup Guide and Trailer Mode BSM) Delete a saved trailer Trailer detail screen Displays the name of the current trailer which is being added or edited. Change the name of the trailer. Change the hitch type of the trailer between ball hitch (conventional), gooseneck or fifth wheel. Note that gooseneck and fifth wheel trailers are not supported for some features (Trailer Backup Guide and Trailer Mode BSM) Change the length of the trailer. If the exact length is not listed, round up the actual length of the trailer to the closest available value. “ Auto” length detection can also be selected. Change the number of axles. Change the brake type (electric or electric over hydraulic) and weight of the trailer, or turn trailer brakes off for that trailer. Save the trailer information If there are any errors with the trailer values, re-select the value or delete and re-save the trailer. If the error continues, contact your Toyota dealer. Multi-information display Settings Meter Settings Language (multi-information display)Settings display Meter display settings that can be changed Language Select to change the language displayed. Units Select to change the units of measure displayed. Meter Style The design of the meter display can be changed. Dial Type Select to change dial type. (Driving information display settings) Fuel economy display Select to change the average fuel consumption display between after start/after reset/after refuel. (Fuel economy) (Audio settings) Select to display/not display the audio system linked display. (Vehicle information display settings) Select to change the displayed content of the following: Drive information and Trip A/B items Select to set the first and second items of the drive information display to any of the following: average vehicle speed/distance/elapsed time. Pop-up display Select to enable/disable pop-up displays for each relevant system. Multi-information display off Select to turn the multi-information display off. To turn the multi-information display on again, press any of the meter control switches. Default setting Select to reset the meter display settings to the default setting. Vehicle functions and settings that can be changed Customizable features Note: Suspension of the settings display Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place. If a warning message is displayed, operation of the settings display will be suspended. Warning: Cautions during setting up the display If the engine is running when changing the display settings, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. Notice: During setting up the display To prevent battery discharge, ensure that the engine is running while setting up the display features. Multi-information display Stop & Start system information Stop & Start system information display Stop & Start system System information display Stop & Start system information (if equipped) Stop & Start system operation time (after start)/status notification Displays the current amount of time the engine has been stopped by the operation of the Stop & Start system.Also shows the status of the Stop & Start system with a pop-up display. (Multi-information display messages) Stop & Start system settings The length of time of the Stop & Start system will operate when the “ A/C” switch of the air conditioning system is on can be set to 2 different levels in “ Settings” of the multi-information display. (Changing the idling stop time with the air conditioning system on) Suggestion function Multi-information display Suggestion function Suggestion function Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches. Suggestion to turn on the headlights If the headlight switch is in other than or , and the vehicle speed is 3 mph (5 km/h) or higher for a certain amount of time when the surroundings are dark, a suggestion message will be displayed. Suggestion to turn off the headlights If the headlights are left on for a certain amount of time after the engine switch has been turned off, a suggestion message will be displayed. When the headlight switch is in the AUTO position: The message asking if you wish to turn the headlights off is displayed. To turn the headlights off, select “ Yes”. If the driver’s door is opened after the engine switch is turned off, this suggestion message will not be displayed. Note: Customization The suggestion function can be turned on/off. (Gauges, meters and multi-information display (with 7-inch display) (, ))