Head restraints Head restraints are provided for all seats. Warning: Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. Use the head restraints designed for each respective seat. Adjust the head restraints to the correct position at all times. After adjusting the head restraints, push down on them and make sure they are locked in position. Do not drive with the head restraints removed. Adjusting a head restraint Front seats Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button . Rear seats (If equipped) Center Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button . Outer To use Lift up the head restraint back to the neutral position and then push the head restraint down. To fold Lift up the head restraint while pressing the lock release button , and fold it forward. Note: Adjusting the height of the head restraints (front seat) Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. Adjusting the rear center seat head restraint (If equipped) Always raise the head restraint one level from the stowed position when using. Removing the head restraints Front seats Pull the head restraint up while pressing the lock release button . If the head restraint touches the ceiling, making the removal difficult, change the seat height or angle. (Adjustment procedure) Rear seats (If equipped) Center Pull the head restraint up while pressing the lock release button . Outer Pull the head restraint up while pressing both lock release buttons . Installing the head restraints Front seats Align the head restraint with the installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint. Rear seats (If equipped) Center Align the head restraint with the installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint. Outer Align the head restraint with the installation holes and push it down to the lock position.