Parking Support Brake function (pedestrians rear of the vehicle)^{* *}If equipped If the rear camera sensor detects a pedestrian behind the vehicle while backing up and the system determines that the possibility of colliding with the detected pedestrian is high, a buzzer will sound. If the system determines that the possibility of colliding with the detected pedestrian is extremely high, the brakes will be applied automatically to help reduce the impact of the collision. Examples of system operation The system operates when an approaching pedestrian is detected behind the vehicle while backing up, and when the brake pedal is not depressed or is depressed late. Display Pedestrians Rear of the Vehicle Screen display of pedestrians rear of the vehicle Displays a message to prompt the driver to brake when a pedestrian is detected in the detection area behind the vehicle. Pedestrian detection icon Example: “ BRAKE!” Warning: If the Parking Support Brake function (pedestrians rear of the vehicle) operates unnecessarily Depress the brake pedal immediately after the Parking Support Brake function (pedestrians rear of the vehicle) operates. (Operation of the function is canceled by depressing the brake pedal.) Correct use of the Parking Support Brake function (pedestrians rear of the vehicle) To ensure the system can operate properly Note: The Parking Support Brake function (pedestrians rear of the vehicle) will operate when The function will operate when the driving assist information indicator is not illuminated (Warning lights and indicators) and all of the following conditions are met: Engine output restriction control The Parking Support Brake is enabled. The vehicle speed is 9 mph (15 km/h) or less. The shift position is in R. When a pedestrian is to the rear of the vehicle The PKSB (Parking Support Brake) determines that a stronger-than-normal-brake operation is necessary to avoid a collision. Brake control Engine output restriction control is operating. The Parking Support Brake determines that an emergency brake operation is necessary to avoid a collision with a pedestrian. The Parking Support Brake function (pedestrians rear of the vehicle) will stop operating when The function will stop operating if any of the following conditions are met: Engine output restriction control The Parking Support Brake is disabled. The collision becomes avoidable with normal brake operation. The pedestrian is no longer detected behind your vehicle. Brake control The Parking Support Brake is disabled. Approximately 2 seconds have elapsed since the vehicle was stopped by brake control. The brake pedal is depressed after the vehicle is stopped by brake control. Re-enabling the Parking Support Brake function (pedestrians rear of the vehicle) Re-enabling the Parking Support Brake Detection area of the Parking Support Brake function (pedestrians rear of the vehicle) The detection area of the Parking Support Brake function (pedestrians rear of the vehicle) differs from the detection area of the RCD function (When a pedestrian is detected). Therefore, even if the RCD function detects a pedestrian and provides an alert, the Parking Support Brake function (pedestrians rear of the vehicle) may not start operating. Situations in which the system may not operate properly Situations in which the system may not operate properly Situations in which the system may operate unexpectedly Situations in which the system may operate unexpectedly