AUTO LSD system^{* *}If equipped The AUTO LSD system aids traction by using the traction control system to control engine performance and braking when one of the drive wheels begins to spin. The system should be used only when one of the drive wheels spinning occurs in a ditch or rough surface. System operation The system can be used only on 2WD models. The system is activated when driving at a speed under 62 mph (100 km/h). The AUTO LSD system will be activated with the following two procedures. To turn the AUTO LSD system on, quickly press and release . The “ AUTO LSD” indicator light will come on. Press again to turn the system off. Note: If the brake system overheats The system will cease operation and a buzzer will alert the driver. At this time, the “ Traction Control Turned OFF” displayed in the multi-information display. Stop the vehicle in a safe place. (There is no problem with continuing normal driving.) The system will be automatically restored after a short time. Warning: To avoid an accident Do not use the AUTO LSD system in conditions other than when one of the drive wheels spinning occurs in a ditch or rough surface. Do not drive with the AUTO LSD system continuously turned on. Failure to do so, a much greater steering effort and more careful cornering control will be required. Notice: Activating while driving Do not activate the AUTO LSD system if the wheel is slipping. Stop the slipping or spinning before activating.