Other interior features USB charging portsUSB Type-C charging ports The USB Type-C charging ports are used to supply electricity at to external devices.Use the appropriate terminal for each charging port type.The USB Type-C charging ports are for charging only. They are not designed for data transfer or other purposes.Depending on the external device, it may not charge properly. Refer to the manual included with the device before using a USB Type-C charging port. Using the USB Type-C charging ports On the instrument panel These USB Type-C charging ports are capable of high power output. An output up to 45 W max on a single port or 52.5 W combined (shared) is possible. The USB Type-C charging ports operate at multiple voltage and multiple wattage levels. Rear of console box (if equipped) The USB Type-C charging ports are used to supply 3.0 A of electricity at 5 V to external devices. Bed (if equipped) Open the lid. The USB Type-C charging ports can be used to supply 3.6 A of electricity at 5 V; 3.0 A of electricity at 9 V; or 2.25 A of electricity at 12 V to external devices. Note: The USB Type-C charging ports can be used when The engine switch is in ACC or ON, or the multimedia system is on. Bed port: The engine switch must be ON. Situations in which the USB Type-C charging ports may not operate correctly Rear of console box: If a device which consumes more than 3.0 A at 5 V is connected If a device designed to communicate with a personal computer, such as a USB memory device, is connected If the connected external device is turned off (depending on device) If the temperature inside the vehicle is high, such as after the vehicle has been parked in the sun About connected external devices Depending on the connected external device, charging may occasionally be suspended and then start again. This is not a malfunction. Notice: To prevent damage to the USB Type-C charging ports Do not insert foreign objects into the ports. Do not spill water or other liquids into the ports. Do not apply excessive force to or impact the USB Type-C charging ports. Do not disassemble or modify the USB Type-C charging ports. To prevent damage to external devices Do not leave external devices in the vehicle. The temperature inside the vehicle may become high, resulting in damage to an external device. Do not push down on or apply unnecessary force to an external device or the cable of an external device while it is connected. To prevent battery discharge Do not use the USB Type-C charging ports for a long period of time with the engine stopped. Wireless chargerWireless charger (if equipped) A portable device can be charged by just placing Qi standard wireless charge compatible portable devices according to the Wireless Power Consortium, such as smartphones and mobile batteries, etc., on the charge area. The compatible portable devices can be found on the following Wireless Power Consortium website.https://www.wirelesspowerconsortium.com/ This function cannot be used with portable devices that are larger than the charging tray. Also, depending on the portable device, it may not operate as normal. Please read the operation manual for portable devices to be used. The “ Qi” logo The “ Qi” logo is a trademark of the Wireless Power Consortium. Name for all parts Vehicles with an automatic transmission Operation indicator light Charging area* Charging tray Approximately 1.0 in. (2.5 cm) Approximately 3.9 in. (10 cm) Vehicles with a manual transmission Operation indicator light Charging area* Charging tray Approximately 1.0 in. (2.5 cm) Approximately 3.9 in. (10 cm) *Portable devices and wireless chargers contain charging coils. The charging coil in the wireless charger can be moved through the charging area to the location of the charging coil in the mobile device.Charging is possible as long as the center of the coil of the mobile device is within the charging area.If 2 or more portable devices are placed on the charging tray, their charging coils may not be properly detected and they may not be charged. Using the wireless charger Place the portable device on the charging tray. Place the charging side of the portable device down with the center of the device in the center of the charge area. When charging, the operation indicator light (orange) comes on. If charging is not occurring, refer to Situations in which the function may not operate normally. When charging is complete, the operation indicator light (green) comes on. Vehicles with an automatic transmission Vehicles with a manual transmission Recharging function When charging is complete and after a fixed time in the charge suspension state, charging restarts. When a portable device is moved significantly in the charge area, the charging coil is disconnected and charging is stopped momentarily. However, if there is a charging coil in the charge area, the charging coil inside the wireless charger will move toward it and then charging restarts. Rapid charging function The following portable devices support rapid charging. Portable devices compliant with WPC Ver1.3.2 and compatible with rapid charging iPhone’s with an iOS version that supports 7.5 W charging (iPhone 8 and later models) Portable devices compatible with Galaxy original rapid charging standard. When a portable device that supports rapid charging is charged, charging automatically switches to the rapid charging function. Lighting conditions of operation indicator light
Operation indicator light Conditions
Charging tray side Multimedia system screen side
Turning off Disappear When the Multimedia power supply is off or engine switch is off
Green (comes on) Gray On Standby (charging possible state)*1
When charging is complete*2
Orange (comes on) Blue Charging
*1Charging power will not be output during standby. A metallic object will not be heated, if it is placed on the charging tray in this state. *2Depending on the portable device, there are cases where the operation indicator light will continue being lit up orange even after the charging is complete. The wireless charger is not working properly The following are situations in which the wireless charger does not work properly and how to deal with the possible causes.
Operation indicator light Multimedia system screen Suspected causes/Handling method
Orange (Flashing repeatedly once every second) Gray Vehicle to wireless charger communication failure If the engine switch is turned on, off and then restart the engine If the engine switch is in ACC, start the engine. (Starting the engine)
Green (Flashing repeatedly once every second) Disappear Wireless charger and multimedia system communication failure If the engine switch is turned on, off and then restart the engine If the engine switch is in ACC, start the engine. (Starting the engine)
Green (comes on) Blue The smart key system is detecting the key Please wait until the key detection is complete.
Green (comes on) Gray Foreign substance detection:A metallic foreign substance is in the charge area, and so the abnormal heating prevention function of the metallic foreign object operated Remove the foreign substance from the charge area.
Portable device misaligned/distanced from charging surface:The charging coil in the portable device moved outside of the charging area, or lens convex is large, or case is thick so the abnormal heating prevention function operated Remove the portable device from the wireless charger, after 5 seconds, then place the portable device so that it is near the center of the wireless charger.Also, if a case or cover is installed to the portable device, remove it.
Green (comes on) Gray Battery protection function of portable device:Before full charging, battery protection function of portable device operated Confirm the setting of portable device. Continued detection of an electronic key:When a Multimedia function is used through vehicle customization, the electronic key is continually detected without being confirmed. In this case, turn the engine switch ACC or ON to confirm the key.
Orange (Repeatedly flashes 4 times continuously) Gray Safety shutdown resulting when the temperature within the wireless charger exceeded the set value Stop charging, remove the portable device from the charging tray, wait for the temperature to drop, and then start charging again.
Note: The wireless charger can be operated when The engine switch is in ACC or ON, or the multimedia system is on. Portable devices that can be charged Portable devices compatible with the Qi wireless charging standard can be charged by the wireless charger. However, compatibility is not guaranteed for mobile devices supporting Qi Ver. 1.0 and 1.3.2 or later. The wireless charger is designed to supply low power electricity (5 W or less) to a cellular phone, smartphone, or other portable device. However, portable devices, such as the following, can be charged with more than 5 W. Charging at 7.5 W or less is supported by iPhone’s that support 7.5 W charging. Charging at 10 W or less is supported by Galaxy device that support 10 W charging of original standard. Charging at 15 W or less is supported by portable devices compliant with EPP output as defined by WPC standard Ver1.3.2. Using the smart key system During charging, when the smart key system searches for an electronic key, charging may be temporarily suspended. When the electronic key is detected, charging will automatically start again. When covers and accessories are attached to portable devices Do not charge in situations where cover and accessories not able to handle Qi are attached to the portable device. Depending on the type of cover (including for certain genuine manufacturer parts) and accessory, it may not be possible to charge.When charging is not performed even with the portable device placed on the charge area, remove the cover and accessories. Important points of the wireless charger If the electronic key cannot be detected within the vehicle interior, charging can not be done. When the door is opened and closed, charging may be temporarily suspended. When charging, the wireless charging device and portable device will get warmer, however this is not a malfunction. When a portable device gets warm while charging may stop due to the protection function on the portable device side. In this case, when the temperature of the portable drops significantly, charge again.The fan may start operating to lower the temperature inside the wireless charger, however this is not a malfunction. Sound generated during operation When the power supply switch is turned on or while a portable device is being identified, operation sounds may be heard. This is not a malfunction. Cleaning the wireless charger Water in the vehicle Trademark information iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. “ Galaxy” is a trademark or registered trademark of Samsung Electronics Co., Ltd. Certification Wireless charger Warning: Caution while driving When charging a portable device, for safety reasons, the driver should not operate the main part of the portable device while driving. Caution while in motion Do not charge lightweight devices such as wireless headphones while in motion. These devices are very light and may be ejected from the charging tray, which may lead to unforeseen accidents. Caution regarding interference with electronic devices People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverters, as well as any other electrical medical device, should consult their physician about the usage of the wireless charger. To prevent malfunctions or burns Observe the following precautions. Failure to do so may result in a equipment failure and damage, catch fire, burns due to overheat or electric shock. Do not insert any metallic objects between the charge area and the portable device while charging Do not attach an aluminum sticker or other metallic object to the charge area Do not attach an aluminum sticker or other metallic object to the side of the portable device (or to its case or cover) that touches the charge area Do not use the charging tray as a small storage space Do not subject to a strong force or impact Do not disassemble, modify or remove Do not charge devices other than specified portable devices Keep away from magnetic items Do not charge devices if the charge area is covered in dust Do not cover with a cloth or similar material Notice: Situations in which the function may not operate normally Devices may not be charged normally in the following situations. The portable device is fully charged The portable device is being charged with a cable connected There is foreign matter between the charge area and portable device Charging has caused the portable device to heat up The temperature around the charging tray is 95°F (35°C) or higher, such as in extreme heat The portable device is placed with its charging side facing up The small portable device such as foldable type is placed in an area misaligned from the charge area The portable device is larger than the charging tray The camera lens protrudes 0.12 in. (3 mm) or more from the surface of the portal device The vehicle is in an area where strong electrical waves or noise are emitted, such as near a television tower, power plant, gasoline station, broadcasting station, large display, airport, etc. Any of the following objects is stuck or installed between the charging side of the portable device and the charge area. Thick cases or covers A case or cover attached with an uneven or tilted surface, so that the charging side is not flat Thick decorations Accessories, such as finger rings, straps, etc. When there is a gap between the charging side of the portable device and the charge area due to a protrusion such as a camera on the charging side of the portable device. When the portable device is in contact with, or is covered by any of the following metallic objects: A flip type case with a magnet on the charging side of the portable device A card that has metal on it, such as aluminum foil, etc. A pack of cigarettes that includes aluminum foil A wallet or bag that is made of metal Coins A heating pad CDs, DVDs or other media A metal accessory A case or cover made of metal Electric wave type wireless remote controls are being used nearby The electronic key is not inside the vehicle 2 or more portable devices are placed on the charging tray at the same time If charging is abnormal or the operation indicator light continues to flash for any other reason, the wireless charger may be malfunctioning. Contact your Toyota dealer. To prevent malfunctions and data corruptions When charging, bringing a credit, or other magnetic card, or magnetic storage media close to the charge area may clear any stored data due to magnetic influence. Also, do not bring a wristwatch or other precision instrument close to the charge area since doing so may cause it to malfunction. Do not charge with a non-contact IC card such as a transportation system IC card inserted between the charging side of a portable device and the charge area. The IC chip may become extremely hot and damage the portable device or IC card. Be especially careful not to charge a portable device inside a case or cover with a non-contact IC card attached. Do not leave portable devices inside the vehicle. The inside of the vehicle can become hot in extreme heat, which could cause a malfunction. If the smartphone OS has been updated If the smartphone OS has been updated to a newer version, its charging specifications may have changed significantly.For details, check the information on the manufacturer’s website. To prevent battery discharge Do not use the wireless charger for a long period of time when the engine is stopped. Assist gripsAssist grips (if equipped) An assist grip installed on the pillar can be used when getting in or out of the vehicle. Notice: To prevent damage to the assist grip Do not hang any heavy object or put a heavy load on the assist grip. Hooks Coat hooks Coat hooksCoat hooks Warning: Items that must not be hung on the hook Do not hang a coat hanger or other hard or sharp object on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles that cause death or serious injury. Power outletPower outlet (12 VDC) The power outlet can be used for 12 V accessories that run on less than 10 A. On the instrument panel Open the lid. Rear of console box (if equipped) Open the lid. Bed (if equipped) Open the lid. When USB Type-C is not in use, accessories that use 12V up to 6A can be used. Note: The power outlet can be used when The engine switch is in ACC or ON, or the multimedia system is on. Bed port: The engine switch must be ON. When turning the engine switch off Disconnect electrical devices with charging functions, such as mobile battery packs. If such devices are left connected, the engine switch may not be turned off normally. Notice: To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short circuit. To prevent the fuse from being blown Do not use an accessory that uses more than 12 V 10 A. To prevent battery discharge Do not use the power outlet longer than necessary when the engine is not running. Power outletPower outlets (120 VAC) (if equipped) Please use as a power supply for electronic devices that use less than 120 VAC. Using the power outlets Rear of the console box Open the lid. Bed Open the lid. When turning the power outlets on Press the “ AC120V” switch. The power outlets can be used when the indicator on the “ AC120V” switch is illuminated. The power outlets are turned off/on each time the “ AC120V” switch is pressed. Maximum available capacity of the power outlet While the vehicle is being driven The maximum capacity of the power outlet is always 120 V AC/100 W. When the vehicle is stationary The maximum capacity is restricted to 120 V AC/100 W when the shift lever is moved to any positions other than P (automatic transmission) or N. The maximum capacity is 120 V AC/400 W when the shift lever is in P (automatic transmission) or N. The maximum capacity of 400 W can only be restored by turning the power outlet main switch off and then on again under condition described above. When connecting a device Open the lid, and fully and securely insert the plug of the device into the power outlet. Rear of the console box Bed When turning the power outlets off Turn the connected devices off. Press the “ AC120V” switch to turn the power outlets off. Disconnect each plug from the power outlets. Close the lid of each power outlet. Note: The power outlet can be used when The engine is running. Electronic devices that can be connected to the power outlets Use electronic devices that can be connected to the 120 VAC power outlets. Depending on the devices being used, the current flow may become high and the electric power for a moment may exceed the regulated capacity. If the regulated capacity is exceeded by the electronic devices being used, the protection function of the power outlet may operate and power outlet may not be able to be used, but this is not a malfunction. However, observe the following precautions: Depending on the devices used, it may cause interference with TV and radio broadcasts. Observe the precautions that are stated in the instruction manuals for each of the electronic devices. It is assumed that many typical general electronic devices will not be used within the vehicle. The following problems may occur when using electronic devices within the vehicle. Electronic device malfunction due to vibrations while driving. Electronic device malfunction or poor operations due to temperature changes* within the vehicle. The installation is unstable and may not operate normally as the compartment within the vehicle is not flat. *Depending on the weather, season, usage environment, etc., the vehicle compartment may undergo extreme high or low temperatures. Power outlet The power outlet on the console box is a device in order to use electronic devices within the vehicle. Devices which may not operate correctly The following 120 VAC devices may not operate properly: Devices with high initial peak wattage Measuring devices that process precise data Devices that require an extremely stable power supply Devices that require a constant power supply from the power outlet, such as a device with a timer. Operating the Stop & Start system (if equipped) When the engine restarts from the engine stopped state due to the operation of the Stop & Start system, the accessory outlet may be temporarily unavailable, however this is not a malfunction. Pressing the “ AC120V” switch again will enable the accessory outlet to be used. When the power supply function cannot be used If the “ AC120V” switch is pressed but the switch indicator does not illuminate, the protection circuit may have operated. In this case, perform the appropriate procedures as follows. Disconnect the plug of each device from the power outlets, check that the total power consumption of all devices to be connected to the power outlets, reconnect the devices and then press the “ AC120V” switch again. Disconnect the plug of each device from the power outlets, check that the devices are not malfunctioning, reconnect the devices and then press the “ AC120V” switch again. If the temperature inside the vehicle is high, such as after the vehicle has been parked under the sun, move the vehicle to a shaded area, use the air conditioning system to sufficiently cool the interior, and then press the “ AC120V” switch again. If the power outlets cannot be used even after performing the appropriate procedures above, have the vehicle inspected by your Toyota dealer. If any electrical device has malfunctioned, park the vehicle in a safe location and turn the “ AC120V” switch off. If the protection function activates and power is cut, perform the following procedure. Stop the vehicle in a safe place and set the parking brake. Ensure that the shift lever is in P (automatic transmission) or N. Check that the power consumed by the electrical devices is within 400 W and any device has not malfunctioned. Press the “ AC120V” switch. If the inside of the vehicle is hot, open the windows to lower the temperature and turn the switch back on once the inside of the vehicle reaches a normal temperature. If following the procedure above does not restore power, have the vehicle inspected at your Toyota dealer. Warning: For safe use Observe the following precautions. Failure to do so may lead to an accident, resulting in death or serious injury. Do not use devices such as the following when driving: Devices which cannot be properly secured within the vehicle. Devices which may distract the driver and be a hindrance to safe driving, such as a TV, DVD player, etc. Unsecured devices which generate heat, such as a toaster, microwave, electric heater, electric kettle, coffee maker, etc., as they may cause burns or a fire in the case of sudden braking or an accident. Devices which may fall under the pedals and prevent the brake pedal from being depressed. Do not use devices which produce steam while the windows are closed. Doing so may cause the windows to fog up, reducing visibility and making it difficult to drive safely. Also, the steam may damage or negatively affect other devices. If the device must be used, stop the vehicle and open the windows before use. Do not use damaged electronic devices. The power supply function may not be able to be used. Do not disconnect the plug of a device while your hands are wet or insert a pin or other object into the power outlet. Also, if a liquid or snow is on the power outlet, dry the outlet before using it. Do not attempt to modify, disassemble or repair a power outlet. For information on repairs, contact your Toyota dealer. Do not let children touch the power outlets. Keep the power outlets free of dust and foreign matter. Also, regularly clean the power outlet. If the plug of a device fits loosely in a power outlet, even though it is fully inserted, replace the power outlet. For information on replacement, contact your Toyota dealer. Using the power outlets while parked or stopped Observe the following precautions. Failure to do so may lead to an accident, possibly resulting in death or serious injury. Do not leave the vehicle unattended while the engine is running and a device is connected to a power outlet. Do not place luggage or get near the vicinity of the tailpipe. Make sure that the hood is closed. Do not put your head or hands anywhere inside the engine room, as the cooling fan may operate suddenly. If too close, hands and clothing (especially a tie, scarf, etc.) may get caught in a fan. Do not stop the vehicle near objects which burn easily. Install and use appropriately related devices to make air supply and exhaust ventilation possible in places where ventilation is bad, such as within garages, and places where the vehicle is surrounded (places where snow accumulates). Do not use in places where ventilation is bad, such as within garages where there are no air supply and exhaust ventilation devices, and places where the vehicle is surrounded (places where snow accumulates, etc.). Do not use the power outlets if the vehicle has a vehicle cover installed. Do not sleep in the vehicle while using devices such as an electric heater. Devices to be connected Read the instruction manual included with the electronic device being used and observe the precautions that are stated regarding the product. Do not use when the power plug or electronic device are damaged. Malfunctions or poor operations may occur when the outside temperatures are particularly high or low. Normal operations may not be possible for electronic devices that require level installation. Excluding electronic devices with waterproof specifications, do not use in places where it can be covered by rain or water, or places with lots of humidity. Do not use medical equipment as the power supply function may temporarily stop depending the conditions of the vehicle. Notice: Observe the following precautions. Failure to do so may lead to the power outlets not operating correctly or damage to the vehicle or a connected device. To avoid short circuit or malfunction Do not set a device which generates heat near the interior components or on a seat. Heat may cause these parts to melt or burn. Do not use devices which are sensitive to vibration or heat in the vehicle.These devices may malfunction due to vibration while driving or heat while the vehicle is parked in the sun. When not using a power outlet, make sure to close the cover. If foreign matter or a liquid enters the power outlet, it may cause a malfunction or short circuit. Do not use a multi-point outlet adapter as doing so may overload the power outlet. Immediately stop using if there is an unusual amount of heat being felt from the power outlet. When the ambient temperature is high If the temperature inside the vehicle is high, such as after the vehicle has been parked under the sun, move the vehicle to a shaded area, use the air conditioning system to sufficiently cool the interior, and then press the “ AC120V” switch again. Sun visorsSun visors To set the visor in the forward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it backward. Vanity mirrors Vanity lights Mirrors Vanity mirrors Lights Vanity lights Vanity mirrors (if equipped) Open the cover. The vanity light turns on. Note: To prevent battery discharge If the vanity lights remain on when the engine switch is turned off, the lights will go off automatically after 20 minutes. Notice: To prevent the battery from being discharged Do not leave the vanity lights on for extended periods while the engine is off. Grocery bag hooksGrocery bag hooks (if equipped) Grocery bag hook is designed to hang things like grocery bag. The shape and number of shopping bag hooks may vary depending on the grade. Auxiliary switchesAuxiliary switches (if equipped) When the Toyota Genuine Accessories Pre-wired Auxiliary Switches* is connected to the vehicle, a 12V DC powered circuit is available for switch operation. There are three auxiliary switches that provide power to connectors in multiple locations where electrical accessories can be used. Remove the waterproof cap (if present) from vehicle wire harness connector to connect accessory wiring harness pigtail. The auxiliary switch will only operate in the engine switch to ON. When an aux switch is pressed, the indicator on the switch will illuminate. If the vehicle’s power usage increases and the battery voltage becomes low, the auxiliary switch system may automatically turn off. The system will turn on again when the vehicle power usage is reduced and the battery voltage increases. *Accessory wire harness pigtails can be purchased at your Toyota dealer. AUX1 AUX2 AUX3 Location of auxiliary switch wire harness connectors: Engine compartment Cabin (behind trim panel) Engine compartment Rear frame Powered Circuits:
Circuit Fuse Name Fuse Size Fuse Location Pigtail Wire Color Connector Location
AUX1 AUX NO.1 15A Engine compartment Black Engine compartment , cabin
AUX2 AUX NO.2 10A Green
AUX3 AUX NO.3_LO 5A White
Common Ground — — — Black/White
Non-Powered Circuits:
Circuit Fuse Name Fuse Size Fuse Location Pigtail Wire Color Connector Location
Rear AUX1 AUX_RR_NO.1 20A Under right-rear seat Black Engine compartment , rear frame
Rear AUX2 AUX_RR_NO.2 15A Green
Common Ground — — — Black/White Rear frame
Warning: For safe use Do not cut or modify the wiring harness of the vehicle body when connecting accessory electronics. Failure to do so may lead to an accident resulting in property damage, serious injury, or death. Notice: To prevent damage to the Auxiliary switches For information on repairs, contact your Toyota dealer. Accessory wiring harness pigtails can be purchased from your Toyota dealer.